listcal – List antenna gain solutions – information, calibration task
Description
This task lists antenna gain solutions in tabular form. The table is organized as follows. Solutions are output by
Spectral window,
Antenna,
Time,
Channel,
and Polarization;
where the inner-most loop is over polarization.
The listcal output table contains two table headers. The top-level header is printed each time the spectral window changes. This header lists the spectral window ID (SpwID), the date of observation (Date), the calibration table name (CalTable), and the measurement set name (MS name).
A lower-level header is printed when the the top-level header is printed, when the antenna names change, and every `pagerows’ of output. The lower-level header columns are described here:
Column Name Description ———– ———– Ant Antenna name (contains sub-columns: Amp, Phs, F) Time Visibility timestamp corresponding to gain solution Field Field name Chn Channel number Amp Complex solution amplitude Phs Complex solution phase F Flag
Elements of the ``F’’ column contain an `F’ when the datum is flagged, and ` ‘ (whitespace) when the datum is not flagged.
Presently, the polarization mode names (for example: R, L) are not given, but the ordering of the polrization modes (left-to-right) is equivalent to the order output by task listobs (see ``Feeds’’ in listobs output).
Input Parameters:
- vis Name of input visibility file
default: none; example: vis=’ngc5921.ms’
- caltable Name of input calibration table
default: none; example: caltable=’ngc5921.gcal’
- field Select data based on field ID(s) or name(s)
default: ‘’==>all; example: field=’1’ field=’0~2’ field ids inclusive from 0 to 2 field=’3C*’ all field names starting with 3C
- antenna Select calibration data based on antenna
default: ‘’–>all; example: antenna=’5’ antenna=’5,6’ antenna index 5 and 6 solutions antenna=’VA05’,’VA06’ VLA antenna 5 and 6
- spw Select spectral window, channel to list
default: ‘’ –> All spws and channels; spw=’2:34’ spectral window 2, channel 34 will only list one spw, one channel at a time
- listfile write output to disk; will not overwrite
default: ‘’ –> write to screen
- pagerows rows per page of listing
default: 50; 0 –> do not paginate
Parameters
Parameter |
Default |
Description |
---|---|---|
vis |
|
|
caltable |
|
|
field |
|
|
antenna |
|
|
spw |
|
|
listfile |
|
|
pagerows |
|
Parameter Explanations
vis
''
Name of input visibility file
caltable
''
Input calibration table to list
field
''
Field name or index
antenna
''
Antenna name or index
spw
''
Spectral window and channel
listfile
''
Disk file to write output
pagerows
int(50)
Rows per page